How to Login to My Netgear Router

By | April 1, 2018

Most of the time, the purpose to get Netgear login, you may need to update the firmware, repair the changes, maintain the networks and modify the settings. For whatever purpose when you go to access Netgear Router you must know some of the important things which make you easy and quick to get the Netgear RouterLogin admin page. The instructions are:

  • The default username and password is ‘admin’, in case you might change it or now don’t remember then Reset Netgear Router before going ahead. It will automatically start with default setting factory.
  • However, the default IP address is 192.168.1.1 which you can also check for yourself following these methods:
    • Press window key and ‘R’ key together on your keyboard > type CMD > Ok > Command Prompt will open > type ipconfig/all > find the default gateway > that is your default IP address.
    • To find Router Default Login Details, you can check the instructions booklet you got with your Netgear Router.

However, we are here to always assist you with proper guidance but you must prior check to this instruction can help you for faster connectivity.  Now take a step for the guidance to Login Netgear Router.

Have You Done The Configuration Of Netgear Router Network Setup?

If your answer is yes, you can directly go to the next step of Netgear Router Login Guidance. If you have not configured then you go with following instruction:

  • Unplug the modem to power off.
  • Connect one end of Ethernet cable to the yellow port located on the back of the router and connect another end of the Ethernet cable to the modem.
  • Plug the modem and turn it on.
  • Press the power switch located on Netgear Router.
  • The LED of green colour will get on, it refers that you have configured.

Netgear Router Login Guidance

  • If you are using a wireless device for router login then first of all open the Wi-Fi manager of your device and on its Wi-Fi network connectivity.
  • Connect with respective Wi-Fi Network following the network key (password)
  • Once you are connected, open any browser such as:
    • Mozilla Firefox
    • Google Chrome
    • Internet Explorer
    • Safari

Mozilla is the most used browser but there is no specific browser requirement, whichever you have installed just open this.

  • Go to the address bar and type 192.168.1.1 (in case the IP address is not working you can type www.routerlogin.net or www.routerlogin.com)
  • At that point, you will be asked for the username or password. As we discussed above, go with the default password or the password you might change.
  • Next option will be “Login”, click on this.
  • You have successfully accessed the routerlogin.net

Now you can go to, check the status of connected devices, Traffic Meter, Guest Network Settings, Change the Password, Parental Control, monitor the data and maintain any kind of setting with your Netgear Router. Keep Router Firmware Updated after a specific time to let your Netgear Router be prevented from unwanted errors.

If you are using Genie App, you must get Registered Genie App. then simply access routerlogin in genie app following the login details.

Leave a Reply

Your email address will not be published. Required fields are marked *